Commercial garage door openers are used for opening and closing large garage doors. These products utilize the most advanced technology to ensure safety, reliability, and smooth operation. Commercial garage door opener systems come with safety sensors to prevent the door from closing if anything is obstructing the path.

Can I Put a Remote on My Commercial Garage Door Opener?

Yes, you can add a remote to your commercial garage door opener. Having one for each team member who will use the garage door is a great idea. This way, everyone can open and close the garage door without getting out of their car. Get in touch with Connecticut Garage Door Service today for more information.

Types of Remotes for Commercial Garage Door Opener

There are many different types of remotes for commercial garage door openers. Some remotes are more advanced than others, and some have more features than others. The following is a list of the most common types of remotes available:

• Keypad Remote: This remote is commonly found on residential garage doors but can also be used on commercial ones. With this remote, you don’t need to install additional equipment on your door opener or wall-mounted control panel. You enter your code into the keypad and press the button to open or close your door.
• Keyless Entry (KE) Remote: This is one of the most popular remote types among commercial garages because they’re easy to use and are often much smaller than other remotes. They work by sending an infrared signal from your car to your garage door opener that triggers it to open or close accordingly in response to your commands through buttons on the remote itself (or through numbers on some models).
• Fob-style remotes: Fob-style remotes are similar to universal remotes in that they can be programmed to work with almost any garage door opener on the market today, but they’re much smaller and more convenient than a universal remote because they don’t require programming at all. They need two AAA batteries (one per unit) and are ready to use right out of the box!
• Programmable remotes: Programmable remotes allow you to program your garage door opener to work only when the remote is within range. This means you can leave the remote in your pocket or purse and not worry about accidentally opening or closing your garage door when you don’t want to.
• Universal remotes: These can be programmed to work with nearly any garage door opener on the market. You can also program them for multiple doors, so you’ll only have to carry one remote instead of five or six.
• Roller-type remote: This remote is shaped like a key fob with a button on one end and an antenna on the other. The roller-type remote sends radio signals to the receiver in the opener and activates it once you press the button. Roller-type remotes cannot be programmed, so you must use them with an automatic door opener system.

Best Remotes for Commercial Garage Doors

The best commercial garage door remotes are the ones that work. Here are some great options if you’re looking for a new remote control.

Liftmaster 890MAX Keyless Entry System

The Liftmaster 890MAX Keyless Entry System is easy to install and has several features that make it one of the top choices for commercial garages. The system comes with two rolling code transmitters, so you can share the same code between multiple doors without worrying about interference or missing the signal when there’s a problem with one of them. It also has an automatic locking feature and an alarm system that will alert you if someone tries to break into your garage door.

Genie Garage Door Remote Control

This Genie Garage Door Remote Control is easy to install and use, making it a great choice for any commercial garage door opener system. It’s compatible with most garage door openers, so you don’t have to worry about compatibility issues when choosing this remote control as your new replacement part for your commercial garage doors. It comes with two transmitters in case one dies, so you don’t have to replace both at once – which saves money.

Radio Frequency Garage Door Openers

Radiofrequency (RF) garage door openers are the most common type of remote used for commercial applications because they can transmit signals over long distances without interference from other electronics such as microwaves, televisions, or cell phones. This means you don’t have to point your remote in any specific direction to trigger it – press any button on the remote, and it will work anywhere within its range. Plus, no batteries are required because these units use electricity instead of batteries for power supply.

Instructions and Safety Precautions When Installing or Using Your Remote

Please read and follow the safety precautions below when installing or using your remote.

• Read the instructions that come with the remote.
• Remove the battery cover on the back of the remote by sliding it off.
• Replace the battery cover by sliding it back on until it clicks into place securely onto your remote control unit
• Use only in a well-ventilated area.
• Do not operate this equipment near water, in wet conditions, or while working with liquids such as paint or varnish.
• Do not use this product where battery fluids may come into contact with eyes, skin, or clothing. If battery fluid is swallowed, call a doctor immediately. If eye contact occurs, flush your eyes with water for 15 minutes and get medical attention if irritation persists. If skin contact occurs, wash thoroughly with soap and water, then neutralize with vinegar followed by soap and water. If clothing contact occurs, remove clothing immediately and wash skin thoroughly with soap and water, then neutralize with vinegar followed by soap and water again before reusing the garment as it may be contaminated by battery fluid which could cause severe burns to skin or eyes if not neutralized before reuse of garment which can occur from direct body contact from clothing during use of this product which could cause severe burns to skin or eyes if not neutralized before reuse of garment which can occur from direct body contact from clothing during use of this product.

Tips on Commercial Garage Door Openers

If you’re the owner of a commercial garage door, you know it’s more than just a door. It’s a large, expensive piece of machinery that can be dangerous when it doesn’t work properly. If you find yourself in need of programming your commercial garage door opener, here are some tips to help you get started.

Check the Battery

If your garage door opener is having issues, it might just be that the battery needs to be replaced. Check the battery; if it’s not working, replace it.

Check the Remote

If you are having issues with programming a commercial garage door opener, it could be that your remote is broken. If you have two remotes for your garage door, try using one to see if it works better than the other. Chances are that one has a problem with it and will need to be replaced or repaired.

Reset the Device

If none of these tips work for you, there may be something wrong with your device or its settings. Try resetting your device by pressing both buttons simultaneously until they flash red and green simultaneously (about 5 seconds). This should reset the device so you can start over again by setting up its programming code.

Read Your Manual

The other step is reading your instruction manual thoroughly. Every opener has its unique set of instructions for programming remotes and keypads, so make sure you know exactly what steps need to be taken before attempting anything else! Some models even offer video tutorials online as well.

Wrapping Up

Commercial garage door openers are used for opening and closing large garage doors. These products utilize the most advanced technology to ensure safety, reliability, and smooth operation. Commercial garage door opener systems come with safety sensors to prevent the door from closing if anything is obstructing the path.

Need help installing your commercial garage door opener remote? Contact Connecticut Garage Door Service today!